request info Download PDF

1. WEIGHING AND LOADING DATA MANAGEMENT DEVICE INSTALLED ON BOARD

The Device is perfectly positioned in the cabin to give you the best view of its display and operability in choosing the data you want to enter before starting the load. Its swivel mount allows you to direct the Device as you wish.

2. BOOM ANGLE SENSOR

The Alpha3 sensor measures the boom angle during lifting, establishing the weighing and weight display window. Alpha3 works with Canbus technology, this means that the wiring to the instrument is reduced and simplified, it also makes it possible to diagnose Alpha3 directly from the instrument. Its degree of protection ensures operation at the most extreme temperatures and environmental conditions. A strong metallic protection ensures Alpha3 and its connectors a prolonged durability to external impacts.

3. FORKS INCLINATION SENSOR

The Alpha3 sensor measures the inclination of the forks with respect to the truck’s inclination position, allowing a weight correction during the loading phase. Alpha3 works with Canbus technology, bringing the benefits described above.

4. LOADLINK54 AND LIFT FORKS’ SENSOR

TWO WEIGHING TECHNOLOGIES TO CHOOSE FROM

4a LOADLINK54

The Loadlink54 sensor measures the lift boom’s flection during loading. Its installation is non-invasive and requires no mechanical modifications to the truck.

4b LIFT FORKS’ SENSOR

The forks’ sensors are properly installed through a mechanical modification of the forks attachment into the lifter, thus to apply the full load to the load cell.

5. TRUCK INCLINATION SENSOR

The Alpha3 sensor measures the inclination of the truck with respect to the earth’s axis, allowing a weight correction during the loading phase. Alpha3 works with Canbus technology, bringing the benefits described above.

front end loader (FEL)

1. WEIGHING AND LOADING DATA MANAGEMENT DEVICE INSTALLED ON BOARD

2. BOOM ANGLE SENSOR

3. FORKS INCLINATION SENSOR

4. LOADLINK54 AND LIFT FORKS’ SENSOR

5. TRUCK INCLINATION SENSOR

Do you need information
or clarifications? Fill out the form,
we will reply as soon as possible.

boom flexion or fork load detection

front end loader (FEL)

1. WEIGHING AND LOADING DATA MANAGEMENT DEVICE INSTALLED ON BOARD

2. BOOM ANGLE SENSOR

3. FORKS INCLINATION SENSOR

4. LOADLINK54 AND LIFT FORKS’ SENSOR

5. TRUCK INCLINATION SENSOR

Do you need information or clarifications? Fill out the form, we will reply as soon as possible.

Do you need information
or clarifications? Fill out the form,
we will reply as soon as possible.